-
Products
-
-
-
After-sale Service
What causes the belt of a Roots blower to break?
Release time:
2020-11-20
The belt of the Roots blower is the component that drives the entire machine to operate, and it is very important. If there are problems during operation, it will affect the use of the equipment. Generally, the belt may break; what are the reasons that cause this?
The belt of the Roots blower is a component that drives the entire machine, and it is very important. If there are problems during operation, it will affect the use of the equipment. Generally, the belt may break; what causes this?
Under normal circumstances, the belt of a three-lobe Roots blower should be replaced once a year. If it is less than this time, the following reasons should be considered.
1. Insufficient belt tension, leading to belt slippage, causing the belt temperature to rise and burn out the belt;
2. Excessive outlet pressure of the blower or excessive gas flow, leading to machine overload and belt breakage;
3. The three-lobe Roots blower rotates ineffectively, leading to belt breakage;
4. Misalignment between the blower wheel and the motor pulley causes belt wear.
5. Belt quality deviation;
6. The V-shaped groove of the belt does not match the pulley, leading to wear and inability to bear the load, resulting in breakage;
7. The belt of the three-lobe Roots blower is used in high-temperature environments;
8. Natural aging over time.
9. Belt quality issues.
The equipment comes with a belt when it leaves the factory, but the quality may vary among different manufacturers. I hope everyone can understand this when making a choice.
Key words:
Submit information now to obtain the total solution of wind turbine
To provide users with high-quality products and convenient pre-sale, sale and after-sales service, reflecting the "Ming Feng" to make users satisfied with the whole process of service.
No. 1-3, West First Road North, Fenghuangshan Industrial Park, Puji Street, Zhangqiu District, Jinan City, Shandong Province
Free service hotline