-
Products
-
-
-
After-sale Service
Steps for Cleaning the Roots Blower Filter
Release time:
2020-12-30
When using a Roots blower, many friends choose to install a silencer or soundproof cover. However, if it runs for a long time without cleaning, it can have a significant impact on the equipment.
Many friends choose to install silencers or soundproof covers when using Roots blowers, but if they run for a long time without cleaning, it can have a significant impact on the equipment. This is because a large amount of impurities will settle in the filter plate of the inlet silencer or soundproof cover, leading to increased intake resistance and reduced flow. At this time, it is necessary to clean the filter plate in a timely manner to continue using it. Below, the Mingfeng Roots blower manufacturer will share some specific cleaning issues!
1. When cleaning the filter mesh of the Roots blower inlet silencer, if the surface of the filter mesh is dirty, it needs to be cleaned to achieve the desired effect (Note: at this time, the filter cotton needs to be replaced, as filter cotton washed with water cannot achieve filtering effect).
2. When the surface of the filter mesh at the inlet silencer of the Roots blower is not very dirty, clean compressed air can be blown from both sides until no dust particles are visible under the light.
3. If after cleaning, it is found that the stainless steel wire on the blower silencing device's filter plate is deformed or damaged, it needs to be replaced in a timely manner.
4. When cleaning impurities, be careful to protect the mesh on the Roots blower silencer filter plate to avoid deformation or damage; otherwise, the reinstalled filter plate will not function as intended.
5. Clean the air filter every two weeks to develop the correct habit of maintaining the filter at all times, avoiding unnecessary troubles.
The above five points are about the cleaning issues of the Roots blower filter mesh. If this is helpful to you, please continue to follow our website!
Key words:
Submit information now to obtain the total solution of wind turbine
To provide users with high-quality products and convenient pre-sale, sale and after-sales service, reflecting the "Ming Feng" to make users satisfied with the whole process of service.
No. 1-3, West First Road North, Fenghuangshan Industrial Park, Puji Street, Zhangqiu District, Jinan City, Shandong Province
Free service hotline