The working principle of a Roots blower


Release time:

2021-04-02

The Mingfeng Luoci fan manufacturer is here to share with everyone about the working principle of the equipment. During the operation process, various parameters need our attention, and there is also the issue of pressure parameters.

  The manufacturer of the Roots blower, Mingfeng, will share with you the working principle of the equipment's use. During operation, various parameters need our attention, especially regarding pressure parameters. In the long-term use of the Roots blower, failures are inevitable, among which insufficient pressure of the Roots blower is a common fan failure, and there are many reasons for this.

Roots blower manufacturer

  1. Due to the long-term operation of the Roots blower, belt wear causes the fan belt to slip, resulting in a decrease in speed;

  2. It may be due to incorrect pressure calibration of the Roots blower before leaving the factory;

  3. When selectingRoots blowermodels, due to the limited selection of models, the pressure of the Roots blower cannot meet production requirements;

  4. The pipeline of the fan equipment is broken, and the pipeline leaks, leading to pressure loss. The ventilation pipeline should be repaired or replaced in a timely manner;

Working principle of Roots blower

  5. Pressure gauge failure, resulting in false pressure readings;

  6. When the exhaust valve is set excessively, the exhaust valve setting parameters should be appropriately lowered;

  7. The safety pressure setting of the safety valve is too low, and the safety pressure of the Roots blower safety valve should be adjusted as needed.

  These seven points may be the reasons for insufficient pressure in the Roots blower equipment, and I hope they can be of some help to you!

Key words: