-
Products
-
-
-
After-sale Service
What maintenance measures are there for high-pressure Roots blowers?
Release time:
2021-05-18
Different types of wind turbine equipment require different maintenance methods. Additionally, since the application scenarios are also different, paying attention to daily maintenance is quite important.
Different types of fan equipment require different maintenance methods. Additionally, due to the varying application scenarios, paying attention to daily maintenance is also quite important. The Mingfeng fan manufacturer will analyze the relevant matters for everyone!Roots BlowerThe impeller device uses automatic self-aligning bearings, while the other end uses roller bearings. The gap between the impeller and the wall plate has been adjusted. The gap between the front and rear impeller wall plates is adjusted to complete the axial orientation of the double-row bearing. If the impeller and wall plate conflict, a feeler gauge can be used to check the gap on the other side of the impeller and next to the machine.
Rotate the fixed bearing cover screws in, and add or remove shim paper between the bearing seat near the pulley end and the bearing cover screws for adjustment, allowing the impeller to move axially. The thickness of the shim can be adjusted according to the gap. After correction, tighten the bolts symmetrically, and the gap between the two impellers should stop adjusting.Roots BlowerWhen adjusting the gap, remove the positioning pin, loosen the tension bolts, and roll the pulley for adjustment.
Maintenance and CareRoots BlowerImpeller: When the impeller is running and at the start of all routine checks, it should be checked for cracks, wear, and dust as much as possible. The blades must be kept clean and the surface dust and rust must be removed regularly with a wire brush, as over time, this dust can unevenly adhere to the blades, disrupting the balance of the blades and causing rotor vibration.
This component plays a crucial role in the equipment. I hope the sharing of the above content can help everyone. If there are any issues with the equipment, you can consult the manufacturer!
Key words:
Submit information now to obtain the total solution of wind turbine
To provide users with high-quality products and convenient pre-sale, sale and after-sales service, reflecting the "Ming Feng" to make users satisfied with the whole process of service.
No. 1-3, West First Road North, Fenghuangshan Industrial Park, Puji Street, Zhangqiu District, Jinan City, Shandong Province
Free service hotline