-
Products
-
-
-
After-sale Service
Vacuum Roots Blower Debugging Issues
Release time:
2020-11-13
The Roots blower may encounter equipment issues during actual operation due to some unexpected situations. Additionally, after the equipment is newly installed or when it has been stopped for a long time and is to be reused, we need to debug the equipment.
The Roots blower may encounter equipment issues during actual operation due to unexpected situations. Additionally, after the equipment is newly installed or when it has been stopped for a long time and is to be reused, we need to debug the equipment.
This machine is a high-speed operating device, and it should be operated correctly according to regulations to ensure good equipment performance. After installing the Roots blower, debugging is required to check for any demolding or looseness in various parts.
Roots Blower Debugging Instructions.
Check the fastening conditions of each part and whether the positioning pins are loose.
Secondly, check if there is any oil leakage inside the blower body. There should be no scaling, rust, or peeling inside.
Pay attention to whether lubrication and heat dissipation are normal, and check the quality of the lubricating oil. Observe if there are any unusual noises during the operation of the Roots blower, and ensure that the unit is not operating under unqualified conditions, while also paying attention to regularly adding grease.
If the blower is overloaded, it may not show immediately, so pay attention to the intake and exhaust pressure. Determine whether the machine is operating normally by observing the increase in bearing temperature and the trend of motor current.
Before disassembling the machine, measure the various fitting sizes of the machine and keep a record. Also, label the parts to ensure that the original fitting requirements are maintained after assembly.
For new machines or blowers after major repairs, the oil tank should be cleaned. Follow the operating steps, and it is recommended to change all lubricating oil after running for 8 hours.
Maintenance should be based on specific usage conditions to establish a reasonable maintenance system and carry it out on time. Keep good records, and it is recommended to conduct inspections annually, replacing bearings and related wear parts.
The relevant matters are as mentioned above. Continue to follow our website to learn new knowledge every day!
Key words:
Submit information now to obtain the total solution of wind turbine
To provide users with high-quality products and convenient pre-sale, sale and after-sales service, reflecting the "Ming Feng" to make users satisfied with the whole process of service.
No. 1-3, West First Road North, Fenghuangshan Industrial Park, Puji Street, Zhangqiu District, Jinan City, Shandong Province
Free service hotline