-
Products
-
-
-
After-sale Service
Precautions for Changing Lubricating Oil of Roots Blower
Release time:
2022-08-09
In normal circumstances, after about 200 hours of operation of the Roots blower, the first oil and grease change should be done, and the second change should be done after one month of operation. After that, changes should be made according to the usage environment and the quality of the oil (grease). It is recommended to change every three months; if the oil temperature exceeds 50 degrees, it is advisable to change once a month. You can also switch to CKC--N320 medium load industrial gear oil. After the Roots blower is put into operation, it is recommended to change all the lubricating oil after 8 hours of operation. What precautions should be taken? The first step is to remove the gear oil, followed by injecting new gear oil. The first change: after one month of operation, the second change after three months, and for long-term operation, change every six months. Pay attention to the oil level regularly and replenish in time.
The applications of Roots blowers are quite numerous, generally used more in construction sites or factories. How to maintain the service life of Roots blowers, and how often should the lubricating oil be changed? Let's analyze it together.
In general, it is normal to change the oil and grease for the first time after about 200 hours of operation of the Roots blower, and to change it for the second time after one month of operation. After that, change according to the usage environment and the quality of the oil (grease). It is recommended to change it every three months; if the oil temperature exceeds 50 degrees, it is advisable to change it once a month. You can switch to CKC--N320 medium load industrial gear oil. After the Roots blower is put into operation, I recommend changing all the lubricating oil after 8 hours of operation. What precautions should be taken? The first step is to remove the gear oil, followed by injecting new gear oil. The first change: after one month of operation, the second change after three months, and for long-term operation, change it every six months. Pay attention to the oil level and replenish it in time. 2. Evaluation of the lubricating oil quantity of the Roots blower: The oil quantity of each model of the Roots blower can be seen at any time through the oil sight glass on the gear side. When stopped, the oil level should be maintained between the middle line. If the oil level is below the middle position, lubricating oil should be added in time. If the oil level is above the middle position, it may cause high oil temperature, exhaust gas ejection, gas leakage, etc. 3. Storage of lubricating oil for the Roots blower: After injecting gear oil, the remaining gear oil should not be directly exposed to the outside to prevent other contaminants from entering the barrel and causing oil contamination. Secondly, oils should be kept away from fire sources and placed in digestion equipment. After use, tighten the lid to keep the oil barrel sealed. New oil and waste oil should be stored separately, and the container for waste oil should not contain new oil to prevent contamination.
Key words:
Submit information now to obtain the total solution of wind turbine
To provide users with high-quality products and convenient pre-sale, sale and after-sales service, reflecting the "Ming Feng" to make users satisfied with the whole process of service.
No. 1-3, West First Road North, Fenghuangshan Industrial Park, Puji Street, Zhangqiu District, Jinan City, Shandong Province
Free service hotline